Floor training ring 4x4 m

Purpose: The ring "Floor Mass" is intended for training and amateur competitions. Excellent for premises with low ceilings and specialised gyms, as well as for temporary (rental) premises due to its simple construction and fast assembly and disassembly. Requires very little storage space due to its compact design. It consists of angled uprights to which the ropes are attached horizontally, well protected by covers along the entire length and treads on the uprights in the corners of the ring, for the injury protection of the athletes.  The protectors are placed by covering the rope fasteners at the corners of the ring at the joints. Four ropes are stretched on each side at 40 cm, 70 cm, 100 cm and 130 cm from the surface of the ring. Canvas flooring is laid over the entire area and tightened around the entire perimeter with anti-slip reinforced PVC fabric.

Materials used in the construction of the ring: the corner posts are made of round, thick-walled tube with a system of floor anchoring. Fastening models are available to suit any substrate and floor finish. For injury protection, the cross rope joints are fitted with PPE filler protectors in PVC interchangeable covers. Ropes for rings are manually produced in a composite method based on a multi-layer composition: galvanically treated steel rope in a compensator, damper multi-layer filler, PVC fabric cover. The fabric is joined by heat-welding, which guarantees the durability and strength of the seams. The covers and treads can be labelled, emblems and customer advertisements can be applied. The kanvas of the ring is made of PPE mats and covered with reinforced PVC fabric.

Ring delivery: The ring is delivered in modular components to optimise and simplify assembly by a minimum number of people and for easy, compact transport to reduce logistics costs. The ring can be transported flatpacked and packed with suitable protective packaging.

Supporting documentation: the raw materials used in the production of the ring are certified and have the appropriate regulatory documentation. The goods are accompanied by the necessary technical documentation (technical passport, certificate of compliance, conclusion of sanitary epidemiological expertise, etc.).

Kit of the ring: stands, canvas cover, ropes, covers, corner protectors, rope tensioning system, fixing and technical kit.

Warranty: Every ring is checked by the Quality Control Department and a relevant stamp is placed on the individual product certificate. The ring has passed the European and national certifications. The factory provides a full factory warranty and post-warranty service.

Individual order: the equipment can also be tailored to the individual specifications of the customer. All the ring elements can be painted in any colour as requested by the customer. Ring treads, covers and covers can also be produced in the colours agreed upon by the customer. The thickness of the canvas canvas can be varied to the customer's specifications, and the ring ropes can also be varied.

Storage: The ring must be stored in a dry, heated storage room in a horizontal position, folded flat. The storage room must provide protection against mechanical and chemical damage, including the effects of aggressive climatic conditions.